BSB2 Airflow-Mod v1
===================

A 3D-printed airflow mod for the Bigscreen Beyond 2 / 2e VR headset.
It ducts the headset's own fan to the headset's internal air channels
and draws warm air out of the eye area. No added electronics.

This is the original design (v1). It consists of three printed parts:
body, cover and slider.


Contents
--------

  README.txt                this file
  LICENSE.txt               license terms (CC BY-NC 4.0)

  STL/                      models for any slicer
    body.stl
    cover.stl
    slider.stl

  3MF/                      print-ready Bambu Studio projects
    body.3mf                body, 0.16 mm layers, tree supports placed
    cover_and_slider.3mf    cover and slider, 0.08 mm layers, no supports


Printing
--------

The 3MF projects were prepared in Bambu Studio 2.5 for a Bambu Lab P1S
with a 0.4 mm nozzle and PLA. Open them in Bambu Studio (or a slicer
that reads its project files) and adjust printer and filament to your
setup.

For other slicers, use the STL files. The settings of the 3MF projects
are a good starting point:

  Body                0.16 mm layer height, with supports
  Cover and slider    0.08 mm layer height, without supports
  Nozzle              0.4 mm
  Walls / infill      2 walls, 15 % infill

All dimensions are in millimeters. Print at 100 % scale.


License
-------

CC BY-NC 4.0. You may use, share and modify the files for personal,
non-commercial purposes with credit to the author. Selling the files or
prints made from them is not permitted. See LICENSE.txt.


Disclaimer
----------

This is an independent project. It is not affiliated with, endorsed by
or supported by Bigscreen. Modifying your headset is at your own risk.
The files are provided "as is", without warranty of any kind.
